1955 Austin A 40 vs. 2008 Chevrolet Blazer

To start off, 2008 Chevrolet Blazer is newer by 53 year(s). Which means there will be less support and parts availability for 1955 Austin A 40. In addition, the cost of maintenance, including insurance, on 1955 Austin A 40 would be higher. At 4,300 cc, 2008 Chevrolet Blazer is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chevrolet Blazer weights approximately 846 kg more than 1955 Austin A 40.

Because 2008 Chevrolet Blazer is four wheel drive (4WD), it will have significant more traction and grip than 1955 Austin A 40. In wet, icy, snow, or gravel driving conditions, 2008 Chevrolet Blazer will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chevrolet Blazer (339 Nm @ 2800 RPM) has 260 more torque (in Nm) than 1955 Austin A 40. (79 Nm @ 2400 RPM). This means 2008 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 1955 Austin A 40.

Compare all specifications:

1955 Austin A 40 2008 Chevrolet Blazer
Make Austin Chevrolet
Model A 40 Blazer
Year Released 1955 2008
Engine Position Front Front
Engine Size 1200 cc 4300 cc
Valves per Cylinder 2 valves 4 valves
Horse Power 41 HP 0 HP
Torque 79 Nm 339 Nm
Torque RPM 2400 RPM 2800 RPM
Engine Compression Ratio 7.2:1 9.2:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 5 seats 6 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1030 kg 1876 kg
Vehicle Length 4130 mm 4320 mm
Vehicle Height 1570 mm 1500 mm
Wheelbase Size 2530 mm 2720 mm
Fuel Tank Capacity 54 L 68 L