1955 Austin A 55 vs. 1947 Simca 8
To start off, 1955 Austin A 55 is newer by 8 year(s). Which means there will be less support and parts availability for 1947 Simca 8. In addition, the cost of maintenance, including insurance, on 1947 Simca 8 would be higher. At 1,489 cc (4 cylinders), 1955 Austin A 55 is equipped with a bigger engine. In terms of performance, 1955 Austin A 55 (51 HP @ 4250 RPM) has 18 more horse power than 1947 Simca 8. (33 HP @ 4200 RPM). In normal driving conditions, 1955 Austin A 55 should accelerate faster than 1947 Simca 8. With that said, vehicle weight also plays an important factor in acceleration. 1955 Austin A 55 weights approximately 135 kg more than 1947 Simca 8. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1955 Austin A 55 | 1947 Simca 8 | |
| Make | Austin | Simca |
| Model | A 55 | 8 |
| Year Released | 1955 | 1947 |
| Engine Position | Front | Front |
| Engine Size | 1489 cc | 1089 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 51 HP | 33 HP |
| Engine RPM | 4250 RPM | 4200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1055 kg | 920 kg |
| Vehicle Length | 4250 mm | 4030 mm |
| Vehicle Width | 1570 mm | 1490 mm |
| Vehicle Height | 1570 mm | 1540 mm |
| Wheelbase Size | 2530 mm | 2430 mm |
