1955 Austin A 55 vs. 1956 Isuzu Minx

To start off, 1956 Isuzu Minx is newer by 1 year(s). Which means there will be less support and parts availability for 1955 Austin A 55. In addition, the cost of maintenance, including insurance, on 1955 Austin A 55 would be higher. At 1,489 cc (4 cylinders), 1955 Austin A 55 is equipped with a bigger engine. In terms of performance, 1955 Austin A 55 (51 HP @ 4250 RPM) has 14 more horse power than 1956 Isuzu Minx. (37 HP @ 4200 RPM). In normal driving conditions, 1955 Austin A 55 should accelerate faster than 1956 Isuzu Minx. With that said, vehicle weight also plays an important factor in acceleration. 1955 Austin A 55 weights approximately 89 kg more than 1956 Isuzu Minx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1955 Austin A 55 1956 Isuzu Minx
Make Austin Isuzu
Model A 55 Minx
Year Released 1955 1956
Engine Position Front Front
Engine Size 1489 cc 1265 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 37 HP
Engine RPM 4250 RPM 4200 RPM
Torque RPM 2000 RPM 2200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1055 kg 966 kg
Vehicle Length 4250 mm 4070 mm
Vehicle Width 1570 mm 1580 mm
Vehicle Height 1570 mm 1530 mm
Wheelbase Size 2530 mm 2370 mm