1955 Austin A 55 vs. 1966 Ginetta G12
To start off, 1966 Ginetta G12 is newer by 11 year(s). Which means there will be less support and parts availability for 1955 Austin A 55. In addition, the cost of maintenance, including insurance, on 1955 Austin A 55 would be higher. At 1,590 cc (4 cylinders), 1966 Ginetta G12 is equipped with a bigger engine. In terms of performance, 1966 Ginetta G12 (158 HP @ 7500 RPM) has 107 more horse power than 1955 Austin A 55. (51 HP @ 4250 RPM) In normal driving conditions, 1966 Ginetta G12 should accelerate faster than 1955 Austin A 55. With that said, vehicle weight also plays an important factor in acceleration. 1955 Austin A 55 weights approximately 268 kg more than 1966 Ginetta G12.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Ginetta G12 (170 Nm @ 5500 RPM) has 60 more torque (in Nm) than 1955 Austin A 55. (110 Nm @ 2000 RPM). This means 1966 Ginetta G12 will have an easier job in driving up hills or pulling heavy equipment than 1955 Austin A 55.
Compare all specifications:
1955 Austin A 55 | 1966 Ginetta G12 | |
Make | Austin | Ginetta |
Model | A 55 | G12 |
Year Released | 1955 | 1966 |
Engine Position | Front | Middle |
Engine Size | 1489 cc | 1590 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 51 HP | 158 HP |
Engine RPM | 4250 RPM | 7500 RPM |
Torque | 110 Nm | 170 Nm |
Torque RPM | 2000 RPM | 5500 RPM |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Vehicle Weight | 1055 kg | 787 kg |
Vehicle Length | 4250 mm | 3560 mm |
Vehicle Width | 1570 mm | 1560 mm |
Vehicle Height | 1570 mm | 1020 mm |
Wheelbase Size | 2530 mm | 2290 mm |