1955 Austin A 55 vs. 1975 Fiat 130

To start off, 1975 Fiat 130 is newer by 20 year(s). Which means there will be less support and parts availability for 1955 Austin A 55. In addition, the cost of maintenance, including insurance, on 1955 Austin A 55 would be higher. At 3,235 cc (6 cylinders), 1975 Fiat 130 is equipped with a bigger engine. In terms of performance, 1975 Fiat 130 (165 HP @ 5600 RPM) has 114 more horse power than 1955 Austin A 55. (51 HP @ 4250 RPM) In normal driving conditions, 1975 Fiat 130 should accelerate faster than 1955 Austin A 55. With that said, vehicle weight also plays an important factor in acceleration. 1955 Austin A 55 weights approximately 60 kg more than 1975 Fiat 130.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1975 Fiat 130 (249 Nm @ 3400 RPM) has 139 more torque (in Nm) than 1955 Austin A 55. (110 Nm @ 2000 RPM). This means 1975 Fiat 130 will have an easier job in driving up hills or pulling heavy equipment than 1955 Austin A 55.

Compare all specifications:

1955 Austin A 55 1975 Fiat 130
Make Austin Fiat
Model A 55 130
Year Released 1955 1975
Engine Position Front Front
Engine Size 1489 cc 3235 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 165 HP
Engine RPM 4250 RPM 5600 RPM
Torque 110 Nm 249 Nm
Torque RPM 2000 RPM 3400 RPM
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1055 kg 995 kg
Vehicle Length 4250 mm 4760 mm
Vehicle Width 1570 mm 1760 mm
Vehicle Height 1570 mm 1380 mm
Wheelbase Size 2530 mm 2730 mm