1955 Austin A 55 vs. 1995 Fiat Tempra
To start off, 1995 Fiat Tempra is newer by 40 year(s). Which means there will be less support and parts availability for 1955 Austin A 55. In addition, the cost of maintenance, including insurance, on 1955 Austin A 55 would be higher. At 1,489 cc (4 cylinders), 1955 Austin A 55 is equipped with a bigger engine. In terms of performance, 1995 Fiat Tempra (75 HP @ 6000 RPM) has 24 more horse power than 1955 Austin A 55. (51 HP @ 4250 RPM) In normal driving conditions, 1995 Fiat Tempra should accelerate faster than 1955 Austin A 55.
Because 1955 Austin A 55 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Austin A 55. However, in wet, icy, snow, or gravel driving conditions, 1995 Fiat Tempra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 110 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
1955 Austin A 55 | 1995 Fiat Tempra | |
Make | Austin | Fiat |
Model | A 55 | Tempra |
Year Released | 1955 | 1995 |
Engine Position | Front | Front |
Engine Size | 1489 cc | 1372 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 51 HP | 75 HP |
Engine RPM | 4250 RPM | 6000 RPM |
Torque | 110 Nm | 110 Nm |
Torque RPM | 2000 RPM | 2900 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Length | 4250 mm | 4360 mm |
Vehicle Width | 1570 mm | 1700 mm |
Vehicle Height | 1570 mm | 1450 mm |
Wheelbase Size | 2530 mm | 2550 mm |