1955 Austin A 55 vs. 2008 Kia Cerato
To start off, 2008 Kia Cerato is newer by 53 year(s). Which means there will be less support and parts availability for 1955 Austin A 55. In addition, the cost of maintenance, including insurance, on 1955 Austin A 55 would be higher. At 1,599 cc (4 cylinders), 2008 Kia Cerato is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Kia Cerato weights approximately 269 kg more than 1955 Austin A 55.
Because 1955 Austin A 55 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Austin A 55. However, in wet, icy, snow, or gravel driving conditions, 2008 Kia Cerato, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Kia Cerato (146 Nm @ 4500 RPM) has 36 more torque (in Nm) than 1955 Austin A 55. (110 Nm @ 2000 RPM). This means 2008 Kia Cerato will have an easier job in driving up hills or pulling heavy equipment than 1955 Austin A 55.
Compare all specifications:
1955 Austin A 55 | 2008 Kia Cerato | |
Make | Austin | Kia |
Model | A 55 | Cerato |
Year Released | 1955 | 2008 |
Engine Position | Front | Front |
Engine Size | 1489 cc | 1599 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 51 HP | 0 HP |
Engine RPM | 4250 RPM | 5800 RPM |
Torque | 110 Nm | 146 Nm |
Torque RPM | 2000 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1055 kg | 1324 kg |
Vehicle Length | 4250 mm | 4350 mm |
Vehicle Width | 1570 mm | 1740 mm |
Vehicle Height | 1570 mm | 1480 mm |
Wheelbase Size | 2530 mm | 2620 mm |