1955 Austin A 55 vs. 2010 Chevrolet Impala

To start off, 2010 Chevrolet Impala is newer by 55 year(s). Which means there will be less support and parts availability for 1955 Austin A 55. In addition, the cost of maintenance, including insurance, on 1955 Austin A 55 would be higher. At 3,900 cc (6 cylinders), 2010 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Impala (230 HP @ 5700 RPM) has 179 more horse power than 1955 Austin A 55. (51 HP @ 4250 RPM) In normal driving conditions, 2010 Chevrolet Impala should accelerate faster than 1955 Austin A 55. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Impala weights approximately 600 kg more than 1955 Austin A 55. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1955 Austin A 55 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Austin A 55. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Impala, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Impala (318 Nm @ 3200 RPM) has 208 more torque (in Nm) than 1955 Austin A 55. (110 Nm @ 2000 RPM). This means 2010 Chevrolet Impala will have an easier job in driving up hills or pulling heavy equipment than 1955 Austin A 55. 2010 Chevrolet Impala has automatic transmission and 1955 Austin A 55 has manual transmission. 1955 Austin A 55 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Impala will be easier to drive especially in heavy traffic.

Compare all specifications:

1955 Austin A 55 2010 Chevrolet Impala
Make Austin Chevrolet
Model A 55 Impala
Year Released 1955 2010
Engine Position Front Front
Engine Size 1489 cc 3900 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 230 HP
Engine RPM 4250 RPM 5700 RPM
Torque 110 Nm 318 Nm
Torque RPM 2000 RPM 3200 RPM
Fuel Type Gasoline Flex Fuel
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1055 kg 1655 kg
Vehicle Length 4250 mm 5090 mm
Vehicle Width 1570 mm 1852 mm
Vehicle Height 1570 mm 1491 mm
Wheelbase Size 2530 mm 2807 mm