1955 Austin-Healey 100 vs. 1988 Fiat Tipo

To start off, 1988 Fiat Tipo is newer by 33 year(s). Which means there will be less support and parts availability for 1955 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1955 Austin-Healey 100 would be higher. At 2,658 cc (4 cylinders), 1955 Austin-Healey 100 is equipped with a bigger engine. In terms of performance, 1955 Austin-Healey 100 (132 HP @ 4750 RPM) has 17 more horse power than 1988 Fiat Tipo. (115 HP @ 5750 RPM). In normal driving conditions, 1955 Austin-Healey 100 should accelerate faster than 1988 Fiat Tipo. With that said, vehicle weight also plays an important factor in acceleration. 1988 Fiat Tipo weights approximately 329 kg more than 1955 Austin-Healey 100.

Because 1955 Austin-Healey 100 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Austin-Healey 100. However, in wet, icy, snow, or gravel driving conditions, 1988 Fiat Tipo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Austin-Healey 100 (228 Nm @ 2500 RPM) has 72 more torque (in Nm) than 1988 Fiat Tipo. (156 Nm @ 3300 RPM). This means 1955 Austin-Healey 100 will have an easier job in driving up hills or pulling heavy equipment than 1988 Fiat Tipo. 1988 Fiat Tipo has automatic transmission and 1955 Austin-Healey 100 has manual transmission. 1955 Austin-Healey 100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Fiat Tipo will be easier to drive especially in heavy traffic.

Compare all specifications:

1955 Austin-Healey 100 1988 Fiat Tipo
Make Austin-Healey Fiat
Model 100 Tipo
Year Released 1955 1988
Engine Position Front Front
Engine Size 2658 cc 1995 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 132 HP 115 HP
Engine RPM 4750 RPM 5750 RPM
Torque 228 Nm 156 Nm
Torque RPM 2500 RPM 3300 RPM
Engine Bore Size 87.3 mm 84 mm
Engine Stroke Size 111.1 mm 90 mm
Engine Compression Ratio 8.3:1 9.5:1
Top Speed 190 km/hour 180 km/hour
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Vehicle Weight 851 kg 1180 kg
Vehicle Length 3860 mm 3960 mm
Vehicle Width 1540 mm 1710 mm
Vehicle Height 1250 mm 1450 mm
Wheelbase Size 2290 mm 2550 mm