1955 Austin-Healey Tickford vs. 1962 Fiat 500
To start off, 1962 Fiat 500 is newer by 7 year(s). Which means there will be less support and parts availability for 1955 Austin-Healey Tickford. In addition, the cost of maintenance, including insurance, on 1955 Austin-Healey Tickford would be higher. At 2,443 cc (4 cylinders), 1955 Austin-Healey Tickford is equipped with a bigger engine. In terms of performance, 1955 Austin-Healey Tickford (105 HP @ 4800 RPM) has 83 more horse power than 1962 Fiat 500. (22 HP @ 4400 RPM). In normal driving conditions, 1955 Austin-Healey Tickford should accelerate faster than 1962 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1955 Austin-Healey Tickford weights approximately 990 kg more than 1962 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1955 Austin-Healey Tickford (184 Nm @ 3000 RPM) has 148 more torque (in Nm) than 1962 Fiat 500. (36 Nm @ 2800 RPM). This means 1955 Austin-Healey Tickford will have an easier job in driving up hills or pulling heavy equipment than 1962 Fiat 500.
Compare all specifications:
| 1955 Austin-Healey Tickford | 1962 Fiat 500 | |
| Make | Austin-Healey | Fiat |
| Model | Tickford | 500 |
| Year Released | 1955 | 1962 |
| Body Type | Sedan | Coupe |
| Engine Position | Front | Rear |
| Engine Size | 2443 cc | 499 cc |
| Engine Cylinders | 4 cylinders | 2 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 105 HP | 22 HP |
| Engine RPM | 4800 RPM | 4400 RPM |
| Torque | 184 Nm | 36 Nm |
| Torque RPM | 3000 RPM | 2800 RPM |
| Fuel Type | Gasoline | Gasoline |
| Vehicle Weight | 1530 kg | 540 kg |
| Vehicle Length | 4500 mm | 3190 mm |
| Vehicle Width | 1710 mm | 1330 mm |
| Vehicle Height | 1400 mm | 1360 mm |
| Wheelbase Size | 2600 mm | 1950 mm |
