1955 Bristol 403 vs. 1992 Buick Park Avenue
To start off, 1992 Buick Park Avenue is newer by 37 year(s). Which means there will be less support and parts availability for 1955 Bristol 403. In addition, the cost of maintenance, including insurance, on 1955 Bristol 403 would be higher. At 3,791 cc (6 cylinders), 1992 Buick Park Avenue is equipped with a bigger engine. In terms of performance, 1992 Buick Park Avenue (205 HP @ 4400 RPM) has 118 more horse power than 1955 Bristol 403. (87 HP @ 5000 RPM) In normal driving conditions, 1992 Buick Park Avenue should accelerate faster than 1955 Bristol 403. With that said, vehicle weight also plays an important factor in acceleration. 1992 Buick Park Avenue weights approximately 425 kg more than 1955 Bristol 403. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Bristol 403 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Bristol 403. However, in wet, icy, snow, or gravel driving conditions, 1992 Buick Park Avenue, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Buick Park Avenue (260 Nm @ 2600 RPM) has 114 more torque (in Nm) than 1955 Bristol 403. (146 Nm @ 3500 RPM). This means 1992 Buick Park Avenue will have an easier job in driving up hills or pulling heavy equipment than 1955 Bristol 403. 1992 Buick Park Avenue has automatic transmission and 1955 Bristol 403 has manual transmission. 1955 Bristol 403 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Buick Park Avenue will be easier to drive especially in heavy traffic.
Compare all specifications:
1955 Bristol 403 | 1992 Buick Park Avenue | |
Make | Bristol | Buick |
Model | 403 | Park Avenue |
Year Released | 1955 | 1992 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 3791 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 87 HP | 205 HP |
Engine RPM | 5000 RPM | 4400 RPM |
Torque | 146 Nm | 260 Nm |
Torque RPM | 3500 RPM | 2600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1225 kg | 1650 kg |
Vehicle Length | 4870 mm | 5220 mm |
Vehicle Width | 1710 mm | 1880 mm |
Vehicle Height | 1530 mm | 1410 mm |
Wheelbase Size | 2900 mm | 2820 mm |