1955 Bristol 405 vs. 2000 Cadillac Seville
To start off, 2000 Cadillac Seville is newer by 45 year(s). Which means there will be less support and parts availability for 1955 Bristol 405. In addition, the cost of maintenance, including insurance, on 1955 Bristol 405 would be higher. At 4,572 cc (8 cylinders), 2000 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2000 Cadillac Seville (290 HP @ 6000 RPM) has 190 more horse power than 1955 Bristol 405. (100 HP @ 5000 RPM) In normal driving conditions, 2000 Cadillac Seville should accelerate faster than 1955 Bristol 405. With that said, vehicle weight also plays an important factor in acceleration. 2000 Cadillac Seville weights approximately 587 kg more than 1955 Bristol 405. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Bristol 405 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Bristol 405. However, in wet, icy, snow, or gravel driving conditions, 2000 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Cadillac Seville (400 Nm @ 4400 RPM) has 248 more torque (in Nm) than 1955 Bristol 405. (152 Nm @ 3750 RPM). This means 2000 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1955 Bristol 405. 2000 Cadillac Seville has automatic transmission and 1955 Bristol 405 has manual transmission. 1955 Bristol 405 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1955 Bristol 405 | 2000 Cadillac Seville | |
Make | Bristol | Cadillac |
Model | 405 | Seville |
Year Released | 1955 | 2000 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 4572 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 100 HP | 290 HP |
Engine RPM | 5000 RPM | 6000 RPM |
Torque | 152 Nm | 400 Nm |
Torque RPM | 3750 RPM | 4400 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1240 kg | 1827 kg |
Vehicle Length | 4820 mm | 5000 mm |
Vehicle Width | 1730 mm | 1910 mm |
Vehicle Height | 1470 mm | 1410 mm |
Wheelbase Size | 2900 mm | 2890 mm |
Fuel Tank Capacity | 72 L | 70 L |