1955 Chrysler 300 vs. 1975 Lancia Fulvia
To start off, 1975 Lancia Fulvia is newer by 20 year(s). Which means there will be less support and parts availability for 1955 Chrysler 300. In addition, the cost of maintenance, including insurance, on 1955 Chrysler 300 would be higher. At 5,425 cc (8 cylinders), 1955 Chrysler 300 is equipped with a bigger engine. In terms of performance, 1955 Chrysler 300 (296 HP @ 5200 RPM) has 182 more horse power than 1975 Lancia Fulvia. (114 HP @ 6000 RPM). In normal driving conditions, 1955 Chrysler 300 should accelerate faster than 1975 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1955 Chrysler 300 weights approximately 930 kg more than 1975 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Chrysler 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Chrysler 300. However, in wet, icy, snow, or gravel driving conditions, 1975 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Chrysler 300 (477 Nm @ 3200 RPM) has 324 more torque (in Nm) than 1975 Lancia Fulvia. (153 Nm @ 4500 RPM). This means 1955 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1975 Lancia Fulvia. 1955 Chrysler 300 has automatic transmission and 1975 Lancia Fulvia has manual transmission. 1975 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1955 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1955 Chrysler 300 | 1975 Lancia Fulvia | |
| Make | Chrysler | Lancia |
| Model | 300 | Fulvia |
| Year Released | 1955 | 1975 |
| Body Type | Sedan | Coupe |
| Engine Position | Front | Front |
| Engine Size | 5425 cc | 1584 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 296 HP | 114 HP |
| Engine RPM | 5200 RPM | 6000 RPM |
| Torque | 477 Nm | 153 Nm |
| Torque RPM | 3200 RPM | 4500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1930 kg | 1000 kg |
| Vehicle Length | 5570 mm | 3990 mm |
| Vehicle Width | 2020 mm | 1570 mm |
| Vehicle Height | 1510 mm | 1330 mm |
| Wheelbase Size | 3210 mm | 2340 mm |
