1955 Chrysler 300 vs. 2004 Audi S3
To start off, 2004 Audi S3 is newer by 49 year(s). Which means there will be less support and parts availability for 1955 Chrysler 300. In addition, the cost of maintenance, including insurance, on 1955 Chrysler 300 would be higher. At 5,425 cc (8 cylinders), 1955 Chrysler 300 is equipped with a bigger engine. In terms of performance, 1955 Chrysler 300 (296 HP @ 5200 RPM) has 74 more horse power than 2004 Audi S3. (222 HP @ 5900 RPM). In normal driving conditions, 1955 Chrysler 300 should accelerate faster than 2004 Audi S3. With that said, vehicle weight also plays an important factor in acceleration. 1955 Chrysler 300 weights approximately 507 kg more than 2004 Audi S3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2004 Audi S3 is four wheel drive (4WD), it will have significant more traction and grip than 1955 Chrysler 300. In wet, icy, snow, or gravel driving conditions, 2004 Audi S3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Chrysler 300 (477 Nm @ 3200 RPM) has 197 more torque (in Nm) than 2004 Audi S3. (280 Nm @ 2200 RPM). This means 1955 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 2004 Audi S3. 1955 Chrysler 300 has automatic transmission and 2004 Audi S3 has manual transmission. 2004 Audi S3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1955 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
1955 Chrysler 300 | 2004 Audi S3 | |
Make | Chrysler | Audi |
Model | 300 | S3 |
Year Released | 1955 | 2004 |
Body Type | Sedan | Hatchback |
Engine Position | Front | Front |
Engine Size | 5425 cc | 1779 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 296 HP | 222 HP |
Engine RPM | 5200 RPM | 5900 RPM |
Torque | 477 Nm | 280 Nm |
Torque RPM | 3200 RPM | 2200 RPM |
Drive Type | Rear | 4WD |
Transmission Type | Automatic | Manual |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 1930 kg | 1423 kg |
Vehicle Length | 5570 mm | 4170 mm |
Vehicle Width | 2020 mm | 1770 mm |
Vehicle Height | 1510 mm | 1420 mm |
Wheelbase Size | 3210 mm | 2530 mm |