1955 Daimler One-O-Four vs. 2010 Infiniti FX
To start off, 2010 Infiniti FX is newer by 55 year(s). Which means there will be less support and parts availability for 1955 Daimler One-O-Four. In addition, the cost of maintenance, including insurance, on 1955 Daimler One-O-Four would be higher. At 5,019 cc (8 cylinders), 2010 Infiniti FX is equipped with a bigger engine. In terms of performance, 2010 Infiniti FX (390 HP @ 6500 RPM) has 252 more horse power than 1955 Daimler One-O-Four. (138 HP @ 4400 RPM) In normal driving conditions, 2010 Infiniti FX should accelerate faster than 1955 Daimler One-O-Four.
Because 2010 Infiniti FX is four wheel drive (4WD), it will have significant more traction and grip than 1955 Daimler One-O-Four. In wet, icy, snow, or gravel driving conditions, 2010 Infiniti FX will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Infiniti FX (501 Nm @ 4400 RPM) has 242 more torque (in Nm) than 1955 Daimler One-O-Four. (259 Nm @ 2000 RPM). This means 2010 Infiniti FX will have an easier job in driving up hills or pulling heavy equipment than 1955 Daimler One-O-Four.
Compare all specifications:
| 1955 Daimler One-O-Four | 2010 Infiniti FX | |
| Make | Daimler | Infiniti |
| Model | One-O-Four | FX |
| Year Released | 1955 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 3468 cc | 5019 cc |
| Engine Cylinders | 6 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 138 HP | 390 HP |
| Engine RPM | 4400 RPM | 6500 RPM |
| Torque | 259 Nm | 501 Nm |
| Torque RPM | 2000 RPM | 4400 RPM |
| Engine Bore Size | 82.6 mm | 95.5 mm |
| Engine Stroke Size | 108 mm | 87.7 mm |
| Drive Type | Rear | 4WD |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Length | 4980 mm | 4870 mm |
| Vehicle Width | 1800 mm | 1930 mm |
| Vehicle Height | 1610 mm | 1690 mm |
| Wheelbase Size | 2900 mm | 2890 mm |
