1955 DKW Munga vs. 1985 Venturi Coupe
To start off, 1985 Venturi Coupe is newer by 30 year(s). Which means there will be less support and parts availability for 1955 DKW Munga. In addition, the cost of maintenance, including insurance, on 1955 DKW Munga would be higher. At 2,458 cc (6 cylinders), 1985 Venturi Coupe is equipped with a bigger engine. In terms of performance, 1985 Venturi Coupe (197 HP @ 5750 RPM) has 160 more horse power than 1955 DKW Munga. (37 HP @ 4200 RPM) In normal driving conditions, 1985 Venturi Coupe should accelerate faster than 1955 DKW Munga. With that said, vehicle weight also plays an important factor in acceleration. 1955 DKW Munga weights approximately 25 kg more than 1985 Venturi Coupe.
Because 1955 DKW Munga is four wheel drive (4WD), it will have significant more traction and grip than 1985 Venturi Coupe. In wet, icy, snow, or gravel driving conditions, 1955 DKW Munga will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Venturi Coupe (297 Nm @ 2500 RPM) has 226 more torque (in Nm) than 1955 DKW Munga. (71 Nm @ 3000 RPM). This means 1985 Venturi Coupe will have an easier job in driving up hills or pulling heavy equipment than 1955 DKW Munga.
Compare all specifications:
| 1955 DKW Munga | 1985 Venturi Coupe | |
| Make | DKW | Venturi |
| Model | Munga | Coupe |
| Year Released | 1955 | 1985 |
| Engine Position | Front | Middle |
| Engine Size | 896 cc | 2458 cc |
| Engine Cylinders | 3 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 37 HP | 197 HP |
| Engine RPM | 4200 RPM | 5750 RPM |
| Torque | 71 Nm | 297 Nm |
| Torque RPM | 3000 RPM | 2500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | 4WD | Rear |
| Vehicle Weight | 1280 kg | 1255 kg |
| Vehicle Length | 3450 mm | 4100 mm |
| Vehicle Width | 1820 mm | 1710 mm |
| Vehicle Height | 1760 mm | 1180 mm |
| Wheelbase Size | 2010 mm | 2410 mm |
