1955 Mercedes-Benz 300 vs. 1999 Ford Contour
To start off, 1999 Ford Contour is newer by 44 year(s). Which means there will be less support and parts availability for 1955 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1955 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1955 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1955 Mercedes-Benz 300 (215 HP @ 5800 RPM) has 87 more horse power than 1999 Ford Contour. (128 HP @ 5500 RPM). In normal driving conditions, 1955 Mercedes-Benz 300 should accelerate faster than 1999 Ford Contour. With that said, vehicle weight also plays an important factor in acceleration. 1955 Mercedes-Benz 300 weights approximately 51 kg more than 1999 Ford Contour. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 1999 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Mercedes-Benz 300 (275 Nm @ 4600 RPM) has 100 more torque (in Nm) than 1999 Ford Contour. (175 Nm @ 4000 RPM). This means 1955 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 1999 Ford Contour. 1999 Ford Contour has automatic transmission and 1955 Mercedes-Benz 300 has manual transmission. 1955 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Ford Contour will be easier to drive especially in heavy traffic.
Compare all specifications:
1955 Mercedes-Benz 300 | 1999 Ford Contour | |
Make | Mercedes-Benz | Ford |
Model | 300 | Contour |
Year Released | 1955 | 1999 |
Engine Position | Front | Front |
Engine Size | 2996 cc | 1989 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 215 HP | 128 HP |
Engine RPM | 5800 RPM | 5500 RPM |
Torque | 275 Nm | 175 Nm |
Torque RPM | 4600 RPM | 4000 RPM |
Engine Compression Ratio | 8.6:1 | 10.0:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1293 kg | 1242 kg |
Vehicle Length | 4530 mm | 4680 mm |
Vehicle Width | 1800 mm | 1760 mm |
Vehicle Height | 1310 mm | 1380 mm |
Wheelbase Size | 2410 mm | 2710 mm |