1955 Morris Oxford vs. 2008 Alfa Romeo 156
To start off, 2008 Alfa Romeo 156 is newer by 53 year(s). Which means there will be less support and parts availability for 1955 Morris Oxford. In addition, the cost of maintenance, including insurance, on 1955 Morris Oxford would be higher. At 1,970 cc (4 cylinders), 2008 Alfa Romeo 156 is equipped with a bigger engine. In terms of performance, 2008 Alfa Romeo 156 (148 HP @ 6300 RPM) has 99 more horse power than 1955 Morris Oxford. (49 HP @ 4200 RPM) In normal driving conditions, 2008 Alfa Romeo 156 should accelerate faster than 1955 Morris Oxford. With that said, vehicle weight also plays an important factor in acceleration. 2008 Alfa Romeo 156 weights approximately 200 kg more than 1955 Morris Oxford. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Morris Oxford is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Morris Oxford. However, in wet, icy, snow, or gravel driving conditions, 2008 Alfa Romeo 156, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Alfa Romeo 156 (182 Nm @ 3800 RPM) has 76 more torque (in Nm) than 1955 Morris Oxford. (106 Nm @ 2400 RPM). This means 2008 Alfa Romeo 156 will have an easier job in driving up hills or pulling heavy equipment than 1955 Morris Oxford. 2008 Alfa Romeo 156 has automatic transmission and 1955 Morris Oxford has manual transmission. 1955 Morris Oxford will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Alfa Romeo 156 will be easier to drive especially in heavy traffic.
Compare all specifications:
1955 Morris Oxford | 2008 Alfa Romeo 156 | |
Make | Morris | Alfa Romeo |
Model | Oxford | 156 |
Year Released | 1955 | 2008 |
Engine Position | Front | Front |
Engine Size | 1488 cc | 1970 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 49 HP | 148 HP |
Engine RPM | 4200 RPM | 6300 RPM |
Torque | 106 Nm | 182 Nm |
Torque RPM | 2400 RPM | 3800 RPM |
Engine Bore Size | 73 mm | 83 mm |
Engine Stroke Size | 88.9 mm | 91 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1085 kg | 1285 kg |
Vehicle Length | 4320 mm | 4440 mm |
Vehicle Width | 1660 mm | 1750 mm |
Vehicle Height | 1610 mm | 1440 mm |
Wheelbase Size | 2470 mm | 2600 mm |