1955 Peugeot 403 vs. 2000 SsangYong Rexton

To start off, 2000 SsangYong Rexton is newer by 45 year(s). Which means there will be less support and parts availability for 1955 Peugeot 403. In addition, the cost of maintenance, including insurance, on 1955 Peugeot 403 would be higher. At 3,199 cc (6 cylinders), 2000 SsangYong Rexton is equipped with a bigger engine. In terms of performance, 2000 SsangYong Rexton (209 HP @ 6200 RPM) has 165 more horse power than 1955 Peugeot 403. (44 HP @ 4900 RPM) In normal driving conditions, 2000 SsangYong Rexton should accelerate faster than 1955 Peugeot 403. With that said, vehicle weight also plays an important factor in acceleration. 2000 SsangYong Rexton weights approximately 833 kg more than 1955 Peugeot 403. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2000 SsangYong Rexton is four wheel drive (4WD), it will have significant more traction and grip than 1955 Peugeot 403. In wet, icy, snow, or gravel driving conditions, 2000 SsangYong Rexton will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 SsangYong Rexton (318 Nm @ 4600 RPM) has 244 more torque (in Nm) than 1955 Peugeot 403. (74 Nm @ 2500 RPM). This means 2000 SsangYong Rexton will have an easier job in driving up hills or pulling heavy equipment than 1955 Peugeot 403. 2000 SsangYong Rexton has automatic transmission and 1955 Peugeot 403 has manual transmission. 1955 Peugeot 403 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 SsangYong Rexton will be easier to drive especially in heavy traffic.

Compare all specifications:

1955 Peugeot 403 2000 SsangYong Rexton
Make Peugeot SsangYong
Model 403 Rexton
Year Released 1955 2000
Body Type Sedan SUV
Engine Position Front Front
Engine Size 1466 cc 3199 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 44 HP 209 HP
Engine RPM 4900 RPM 6200 RPM
Torque 74 Nm 318 Nm
Torque RPM 2500 RPM 4600 RPM
Engine Bore Size 80 mm 89.9 mm
Engine Stroke Size 73 mm 84 mm
Engine Compression Ratio 7.0:1 10.0:1
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1067 kg 1900 kg
Vehicle Length 4480 mm 4730 mm
Vehicle Width 1680 mm 1880 mm
Vehicle Height 1510 mm 1770 mm
Wheelbase Size 2670 mm 2830 mm