1956 Abarth 750 vs. 2008 Hummer H3
To start off, 2008 Hummer H3 is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Abarth 750. In addition, the cost of maintenance, including insurance, on 1956 Abarth 750 would be higher. At 3,653 cc (5 cylinders), 2008 Hummer H3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Hummer H3 weights approximately 1646 kg more than 1956 Abarth 750.
Because 2008 Hummer H3 is four wheel drive (4WD), it will have significant more traction and grip than 1956 Abarth 750. In wet, icy, snow, or gravel driving conditions, 2008 Hummer H3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Hummer H3 (328 Nm @ 4600 RPM) has 273 more torque (in Nm) than 1956 Abarth 750. (55 Nm @ 4000 RPM). This means 2008 Hummer H3 will have an easier job in driving up hills or pulling heavy equipment than 1956 Abarth 750.
Compare all specifications:
| 1956 Abarth 750 | 2008 Hummer H3 | |
| Make | Abarth | Hummer |
| Model | 750 | H3 |
| Year Released | 1956 | 2008 |
| Engine Position | Rear | Front |
| Engine Size | 747 cc | 3653 cc |
| Engine Cylinders | 4 cylinders | 5 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 40 HP | 0 HP |
| Torque | 55 Nm | 328 Nm |
| Torque RPM | 4000 RPM | 4600 RPM |
| Engine Bore Size | 61 mm | 95.5 mm |
| Engine Stroke Size | 64 mm | 102 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | 4WD |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 585 kg | 2231 kg |
| Vehicle Length | 3540 mm | 5180 mm |
| Vehicle Height | 1410 mm | 2020 mm |
| Wheelbase Size | 2010 mm | 2850 mm |
| Fuel Tank Capacity | 27 L | 87 L |
