1956 Abarth Renault vs. 1996 Italdesign Nazca
To start off, 1996 Italdesign Nazca is newer by 40 year(s). Which means there will be less support and parts availability for 1956 Abarth Renault. In addition, the cost of maintenance, including insurance, on 1956 Abarth Renault would be higher. At 4,988 cc (12 cylinders), 1996 Italdesign Nazca is equipped with a bigger engine. In terms of performance, 1996 Italdesign Nazca (346 HP @ 5200 RPM) has 237 more horse power than 1956 Abarth Renault. (109 HP @ 4500 RPM) In normal driving conditions, 1996 Italdesign Nazca should accelerate faster than 1956 Abarth Renault. With that said, vehicle weight also plays an important factor in acceleration. 1996 Italdesign Nazca weights approximately 110 kg more than 1956 Abarth Renault. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1956 Abarth Renault | 1996 Italdesign Nazca | |
| Make | Abarth | Italdesign |
| Model | Renault | Nazca |
| Year Released | 1956 | 1996 |
| Engine Position | Front | Middle |
| Engine Size | 1996 cc | 4988 cc |
| Engine Cylinders | 4 cylinders | 12 cylinders |
| Engine Type | in-line | V |
| Horse Power | 109 HP | 346 HP |
| Engine RPM | 4500 RPM | 5200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Top Speed | 175 km/hour | 297 km/hour |
| Drive Type | Rear | Rear |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 890 kg | 1000 kg |
| Vehicle Length | 4710 mm | 4400 mm |
| Vehicle Width | 1730 mm | 2090 mm |
| Vehicle Height | 1550 mm | 1110 mm |
| Wheelbase Size | 2810 mm | 2610 mm |
