1956 AC Aceca-Bristol vs. 2000 Holden Vectra
To start off, 2000 Holden Vectra is newer by 44 year(s). Which means there will be less support and parts availability for 1956 AC Aceca-Bristol. In addition, the cost of maintenance, including insurance, on 1956 AC Aceca-Bristol would be higher. At 2,198 cc (4 cylinders), 2000 Holden Vectra is equipped with a bigger engine. In terms of performance, 2000 Holden Vectra (140 HP @ 5200 RPM) has 15 more horse power than 1956 AC Aceca-Bristol. (125 HP @ 6000 RPM) In normal driving conditions, 2000 Holden Vectra should accelerate faster than 1956 AC Aceca-Bristol. With that said, vehicle weight also plays an important factor in acceleration. 2000 Holden Vectra weights approximately 335 kg more than 1956 AC Aceca-Bristol. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 AC Aceca-Bristol is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 AC Aceca-Bristol. However, in wet, icy, snow, or gravel driving conditions, 2000 Holden Vectra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Holden Vectra (200 Nm @ 4000 RPM) has 33 more torque (in Nm) than 1956 AC Aceca-Bristol. (167 Nm @ 4500 RPM). This means 2000 Holden Vectra will have an easier job in driving up hills or pulling heavy equipment than 1956 AC Aceca-Bristol. 2000 Holden Vectra has automatic transmission and 1956 AC Aceca-Bristol has manual transmission. 1956 AC Aceca-Bristol will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Holden Vectra will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 AC Aceca-Bristol | 2000 Holden Vectra | |
Make | AC | Holden |
Model | Aceca-Bristol | Vectra |
Year Released | 1956 | 2000 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 2198 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 125 HP | 140 HP |
Engine RPM | 6000 RPM | 5200 RPM |
Torque | 167 Nm | 200 Nm |
Torque RPM | 4500 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 965 kg | 1300 kg |
Vehicle Length | 4070 mm | 4500 mm |
Vehicle Width | 1560 mm | 1710 mm |
Vehicle Height | 1330 mm | 1430 mm |
Wheelbase Size | 2290 mm | 2650 mm |