1956 AC Aceca-Bristol vs. 2002 Lancia Thesis

To start off, 2002 Lancia Thesis is newer by 46 year(s). Which means there will be less support and parts availability for 1956 AC Aceca-Bristol. In addition, the cost of maintenance, including insurance, on 1956 AC Aceca-Bristol would be higher. At 1,999 cc (5 cylinders), 2002 Lancia Thesis is equipped with a bigger engine. In terms of performance, 2002 Lancia Thesis (185 HP @ 4100 RPM) has 60 more horse power than 1956 AC Aceca-Bristol. (125 HP @ 6000 RPM) In normal driving conditions, 2002 Lancia Thesis should accelerate faster than 1956 AC Aceca-Bristol. With that said, vehicle weight also plays an important factor in acceleration. 2002 Lancia Thesis weights approximately 730 kg more than 1956 AC Aceca-Bristol. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 AC Aceca-Bristol is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 AC Aceca-Bristol. However, in wet, icy, snow, or gravel driving conditions, 2002 Lancia Thesis, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Lancia Thesis (305 Nm) has 138 more torque (in Nm) than 1956 AC Aceca-Bristol. (167 Nm). This means 2002 Lancia Thesis will have an easier job in driving up hills or pulling heavy equipment than 1956 AC Aceca-Bristol. 2002 Lancia Thesis has automatic transmission and 1956 AC Aceca-Bristol has manual transmission. 1956 AC Aceca-Bristol will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Lancia Thesis will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 AC Aceca-Bristol 2002 Lancia Thesis
Make AC Lancia
Model Aceca-Bristol Thesis
Year Released 1956 2002
Engine Position Front Front
Engine Size 1971 cc 1999 cc
Engine Cylinders 6 cylinders 5 cylinders
Engine Type in-line in-line
Horse Power 125 HP 185 HP
Engine RPM 6000 RPM 4100 RPM
Torque 167 Nm 305 Nm
Engine Bore Size 66 mm 82 mm
Engine Stroke Size 96 mm 75.7 mm
Engine Compression Ratio 9.0:1 8.5:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 965 kg 1695 kg
Vehicle Length 4070 mm 4880 mm
Vehicle Height 1330 mm 1480 mm
Wheelbase Size 2290 mm 2600 mm