1956 AC Aceca-Bristol vs. 2005 Toyota Sienna
To start off, 2005 Toyota Sienna is newer by 49 year(s). Which means there will be less support and parts availability for 1956 AC Aceca-Bristol. In addition, the cost of maintenance, including insurance, on 1956 AC Aceca-Bristol would be higher. At 3,298 cc (6 cylinders), 2005 Toyota Sienna is equipped with a bigger engine. In terms of performance, 2005 Toyota Sienna (230 HP @ 5200 RPM) has 105 more horse power than 1956 AC Aceca-Bristol. (125 HP @ 6000 RPM) In normal driving conditions, 2005 Toyota Sienna should accelerate faster than 1956 AC Aceca-Bristol. With that said, vehicle weight also plays an important factor in acceleration. 2005 Toyota Sienna weights approximately 924 kg more than 1956 AC Aceca-Bristol. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 AC Aceca-Bristol is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 AC Aceca-Bristol. However, in wet, icy, snow, or gravel driving conditions, 2005 Toyota Sienna, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Toyota Sienna (343 Nm) has 176 more torque (in Nm) than 1956 AC Aceca-Bristol. (167 Nm). This means 2005 Toyota Sienna will have an easier job in driving up hills or pulling heavy equipment than 1956 AC Aceca-Bristol. 2005 Toyota Sienna has automatic transmission and 1956 AC Aceca-Bristol has manual transmission. 1956 AC Aceca-Bristol will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Toyota Sienna will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 AC Aceca-Bristol | 2005 Toyota Sienna | |
Make | AC | Toyota |
Model | Aceca-Bristol | Sienna |
Year Released | 1956 | 2005 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 3298 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 125 HP | 230 HP |
Engine RPM | 6000 RPM | 5200 RPM |
Torque | 167 Nm | 343 Nm |
Engine Bore Size | 66 mm | 92 mm |
Engine Stroke Size | 96 mm | 83 mm |
Engine Compression Ratio | 9.0:1 | 10.8:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 7 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 965 kg | 1889 kg |
Vehicle Length | 4070 mm | 5090 mm |
Vehicle Width | 1560 mm | 1970 mm |
Vehicle Height | 1330 mm | 1760 mm |
Wheelbase Size | 2290 mm | 3040 mm |
Fuel Tank Capacity | 59 L | 76 L |