1956 AC Aceca-Bristol vs. 2013 Toyota Highlander
To start off, 2013 Toyota Highlander is newer by 57 year(s). Which means there will be less support and parts availability for 1956 AC Aceca-Bristol. In addition, the cost of maintenance, including insurance, on 1956 AC Aceca-Bristol would be higher. At 3,500 cc (6 cylinders), 2013 Toyota Highlander is equipped with a bigger engine. In terms of performance, 2013 Toyota Highlander (266 HP @ 5800 RPM) has 141 more horse power than 1956 AC Aceca-Bristol. (125 HP @ 6000 RPM) In normal driving conditions, 2013 Toyota Highlander should accelerate faster than 1956 AC Aceca-Bristol. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Highlander weights approximately 780 kg more than 1956 AC Aceca-Bristol. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 AC Aceca-Bristol is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 AC Aceca-Bristol. However, in wet, icy, snow, or gravel driving conditions, 2013 Toyota Highlander, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Highlander (252 Nm @ 4100 RPM) has 85 more torque (in Nm) than 1956 AC Aceca-Bristol. (167 Nm @ 4500 RPM). This means 2013 Toyota Highlander will have an easier job in driving up hills or pulling heavy equipment than 1956 AC Aceca-Bristol. 2013 Toyota Highlander has automatic transmission and 1956 AC Aceca-Bristol has manual transmission. 1956 AC Aceca-Bristol will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Highlander will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 AC Aceca-Bristol | 2013 Toyota Highlander | |
| Make | AC | Toyota |
| Model | Aceca-Bristol | Highlander |
| Year Released | 1956 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 1971 cc | 3500 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 125 HP | 266 HP |
| Engine RPM | 6000 RPM | 5800 RPM |
| Torque | 167 Nm | 252 Nm |
| Torque RPM | 4500 RPM | 4100 RPM |
| Engine Bore Size | 66 mm | 90 mm |
| Engine Stroke Size | 96 mm | 105 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 5-speed automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 965 kg | 1745 kg |
| Vehicle Length | 4070 mm | 4785 mm |
| Vehicle Width | 1560 mm | 1910 mm |
| Vehicle Height | 1330 mm | 1760 mm |
| Wheelbase Size | 2290 mm | 2790 mm |
| Fuel Tank Capacity | 59 L | 73 L |
