1956 AC Aceca vs. 2010 Pagani Zonda

To start off, 2010 Pagani Zonda is newer by 54 year(s). Which means there will be less support and parts availability for 1956 AC Aceca. In addition, the cost of maintenance, including insurance, on 1956 AC Aceca would be higher. At 7,300 cc (12 cylinders), 2010 Pagani Zonda is equipped with a bigger engine. In terms of performance, 2010 Pagani Zonda (594 HP @ 6150 RPM) has 471 more horse power than 1956 AC Aceca. (123 HP @ 6000 RPM) In normal driving conditions, 2010 Pagani Zonda should accelerate faster than 1956 AC Aceca. With that said, vehicle weight also plays an important factor in acceleration. 2010 Pagani Zonda weights approximately 336 kg more than 1956 AC Aceca. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Pagani Zonda (759 Nm) has 591 more torque (in Nm) than 1956 AC Aceca. (168 Nm). This means 2010 Pagani Zonda will have an easier job in driving up hills or pulling heavy equipment than 1956 AC Aceca.

Compare all specifications:

1956 AC Aceca 2010 Pagani Zonda
Make AC Pagani
Model Aceca Zonda
Year Released 1956 2010
Engine Position Front Middle
Engine Size 1971 cc 7300 cc
Engine Cylinders 6 cylinders 12 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 123 HP 594 HP
Engine RPM 6000 RPM 6150 RPM
Torque 168 Nm 759 Nm
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 894 kg 1230 kg
Vehicle Length 4070 mm 4435 mm
Vehicle Width 1560 mm 2055 mm
Vehicle Height 1330 mm 1141 mm
Wheelbase Size 2290 mm 2730 mm