1956 Armstrong Siddeley Sapphire vs. 1988 Buick Reatta
To start off, 1988 Buick Reatta is newer by 32 year(s). Which means there will be less support and parts availability for 1956 Armstrong Siddeley Sapphire. In addition, the cost of maintenance, including insurance, on 1956 Armstrong Siddeley Sapphire would be higher. At 3,791 cc (6 cylinders), 1988 Buick Reatta is equipped with a bigger engine. In terms of performance, 1988 Buick Reatta (165 HP @ 4800 RPM) has 80 more horse power than 1956 Armstrong Siddeley Sapphire. (85 HP @ 4400 RPM) In normal driving conditions, 1988 Buick Reatta should accelerate faster than 1956 Armstrong Siddeley Sapphire. With that said, vehicle weight also plays an important factor in acceleration. 1988 Buick Reatta weights approximately 176 kg more than 1956 Armstrong Siddeley Sapphire. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Armstrong Siddeley Sapphire is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Armstrong Siddeley Sapphire. However, in wet, icy, snow, or gravel driving conditions, 1988 Buick Reatta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Buick Reatta (285 Nm @ 2000 RPM) has 125 more torque (in Nm) than 1956 Armstrong Siddeley Sapphire. (160 Nm @ 1750 RPM). This means 1988 Buick Reatta will have an easier job in driving up hills or pulling heavy equipment than 1956 Armstrong Siddeley Sapphire. 1988 Buick Reatta has automatic transmission and 1956 Armstrong Siddeley Sapphire has manual transmission. 1956 Armstrong Siddeley Sapphire will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1988 Buick Reatta will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Armstrong Siddeley Sapphire | 1988 Buick Reatta | |
Make | Armstrong Siddeley | Buick |
Model | Sapphire | Reatta |
Year Released | 1956 | 1988 |
Engine Position | Front | Front |
Engine Size | 2307 cc | 3791 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 85 HP | 165 HP |
Engine RPM | 4400 RPM | 4800 RPM |
Torque | 160 Nm | 285 Nm |
Torque RPM | 1750 RPM | 2000 RPM |
Engine Bore Size | 70 mm | 96.5 mm |
Engine Stroke Size | 100 mm | 86.4 mm |
Engine Compression Ratio | 7.5:1 | 8.5:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1360 kg | 1536 kg |
Vehicle Length | 4580 mm | 4670 mm |
Vehicle Width | 1730 mm | 1860 mm |
Vehicle Height | 1570 mm | 1310 mm |
Wheelbase Size | 2900 mm | 2510 mm |