1956 Armstrong Siddeley Sapphire vs. 2000 Toyota Mark II
To start off, 2000 Toyota Mark II is newer by 44 year(s). Which means there will be less support and parts availability for 1956 Armstrong Siddeley Sapphire. In addition, the cost of maintenance, including insurance, on 1956 Armstrong Siddeley Sapphire would be higher. At 2,307 cc (6 cylinders), 1956 Armstrong Siddeley Sapphire is equipped with a bigger engine. In terms of performance, 2000 Toyota Mark II (156 HP @ 6200 RPM) has 71 more horse power than 1956 Armstrong Siddeley Sapphire. (85 HP @ 4400 RPM) In normal driving conditions, 2000 Toyota Mark II should accelerate faster than 1956 Armstrong Siddeley Sapphire. With that said, vehicle weight also plays an important factor in acceleration. 2000 Toyota Mark II weights approximately 150 kg more than 1956 Armstrong Siddeley Sapphire. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2000 Toyota Mark II is four wheel drive (4WD), it will have significant more traction and grip than 1956 Armstrong Siddeley Sapphire. In wet, icy, snow, or gravel driving conditions, 2000 Toyota Mark II will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Toyota Mark II (200 Nm @ 4400 RPM) has 40 more torque (in Nm) than 1956 Armstrong Siddeley Sapphire. (160 Nm @ 1750 RPM). This means 2000 Toyota Mark II will have an easier job in driving up hills or pulling heavy equipment than 1956 Armstrong Siddeley Sapphire. 2000 Toyota Mark II has automatic transmission and 1956 Armstrong Siddeley Sapphire has manual transmission. 1956 Armstrong Siddeley Sapphire will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Toyota Mark II will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Armstrong Siddeley Sapphire | 2000 Toyota Mark II | |
Make | Armstrong Siddeley | Toyota |
Model | Sapphire | Mark II |
Year Released | 1956 | 2000 |
Engine Position | Front | Front |
Engine Size | 2307 cc | 1988 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 85 HP | 156 HP |
Engine RPM | 4400 RPM | 6200 RPM |
Torque | 160 Nm | 200 Nm |
Torque RPM | 1750 RPM | 4400 RPM |
Engine Bore Size | 70 mm | 75 mm |
Engine Stroke Size | 100 mm | 75 mm |
Engine Compression Ratio | 7.5:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1360 kg | 1510 kg |
Vehicle Length | 4580 mm | 4740 mm |
Vehicle Width | 1730 mm | 1770 mm |
Vehicle Height | 1570 mm | 1470 mm |
Wheelbase Size | 2900 mm | 2600 mm |