1956 Armstrong Siddeley Sapphire vs. 2010 SsangYong Actyon
To start off, 2010 SsangYong Actyon is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Armstrong Siddeley Sapphire. In addition, the cost of maintenance, including insurance, on 1956 Armstrong Siddeley Sapphire would be higher. At 2,307 cc (6 cylinders), 1956 Armstrong Siddeley Sapphire is equipped with a bigger engine. In terms of performance, 2010 SsangYong Actyon (139 HP @ 4000 RPM) has 54 more horse power than 1956 Armstrong Siddeley Sapphire. (85 HP @ 4400 RPM) In normal driving conditions, 2010 SsangYong Actyon should accelerate faster than 1956 Armstrong Siddeley Sapphire. With that said, vehicle weight also plays an important factor in acceleration. 2010 SsangYong Actyon weights approximately 416 kg more than 1956 Armstrong Siddeley Sapphire. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 SsangYong Actyon is four wheel drive (4WD), it will have significant more traction and grip than 1956 Armstrong Siddeley Sapphire. In wet, icy, snow, or gravel driving conditions, 2010 SsangYong Actyon will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 SsangYong Actyon (310 Nm @ 2400 RPM) has 150 more torque (in Nm) than 1956 Armstrong Siddeley Sapphire. (160 Nm @ 1750 RPM). This means 2010 SsangYong Actyon will have an easier job in driving up hills or pulling heavy equipment than 1956 Armstrong Siddeley Sapphire. 2010 SsangYong Actyon has automatic transmission and 1956 Armstrong Siddeley Sapphire has manual transmission. 1956 Armstrong Siddeley Sapphire will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 SsangYong Actyon will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Armstrong Siddeley Sapphire | 2010 SsangYong Actyon | |
Make | Armstrong Siddeley | SsangYong |
Model | Sapphire | Actyon |
Year Released | 1956 | 2010 |
Body Type | Sedan | Crossover |
Engine Position | Front | Front |
Engine Size | 2307 cc | 1998 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 85 HP | 139 HP |
Engine RPM | 4400 RPM | 4000 RPM |
Torque | 160 Nm | 310 Nm |
Torque RPM | 1750 RPM | 2400 RPM |
Engine Bore Size | 70 mm | 86.2 mm |
Engine Stroke Size | 100 mm | 85.6 mm |
Engine Compression Ratio | 7.5:1 | 18.1:1 |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1360 kg | 1776 kg |
Vehicle Length | 4580 mm | 4460 mm |
Vehicle Width | 1730 mm | 1750 mm |
Vehicle Height | 1570 mm | 1890 mm |
Wheelbase Size | 2900 mm | 2750 mm |