1956 Aston Martin DB2 vs. 1983 Nissan Pulsar
To start off, 1983 Nissan Pulsar is newer by 27 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB2 would be higher. At 2,920 cc (6 cylinders), 1956 Aston Martin DB2 is equipped with a bigger engine. In terms of performance, 1956 Aston Martin DB2 (118 HP) has 48 more horse power than 1983 Nissan Pulsar. (70 HP). In normal driving conditions, 1956 Aston Martin DB2 should accelerate faster than 1983 Nissan Pulsar. With that said, vehicle weight also plays an important factor in acceleration. 1956 Aston Martin DB2 weights approximately 295 kg more than 1983 Nissan Pulsar. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 1983 Nissan Pulsar, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Aston Martin DB2 (240 Nm @ 3000 RPM) has 125 more torque (in Nm) than 1983 Nissan Pulsar. (115 Nm @ 3200 RPM). This means 1956 Aston Martin DB2 will have an easier job in driving up hills or pulling heavy equipment than 1983 Nissan Pulsar. 1983 Nissan Pulsar has automatic transmission and 1956 Aston Martin DB2 has manual transmission. 1956 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Nissan Pulsar will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Aston Martin DB2 | 1983 Nissan Pulsar | |
Make | Aston Martin | Nissan |
Model | DB2 | Pulsar |
Year Released | 1956 | 1983 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 2920 cc | 1486 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 118 HP | 70 HP |
Torque | 240 Nm | 115 Nm |
Torque RPM | 3000 RPM | 3200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1175 kg | 880 kg |
Vehicle Length | 4310 mm | 4140 mm |
Vehicle Width | 1660 mm | 1630 mm |
Vehicle Height | 1370 mm | 1400 mm |
Wheelbase Size | 2520 mm | 2420 mm |