1956 Aston Martin DB2 vs. 2000 Peugeot 206
To start off, 2000 Peugeot 206 is newer by 44 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB2 would be higher. At 2,920 cc (6 cylinders), 1956 Aston Martin DB2 is equipped with a bigger engine. In terms of performance, 1956 Aston Martin DB2 (118 HP @ 5000 RPM) has 10 more horse power than 2000 Peugeot 206. (108 HP @ 6000 RPM). In normal driving conditions, 1956 Aston Martin DB2 should accelerate faster than 2000 Peugeot 206. With that said, vehicle weight also plays an important factor in acceleration. 1956 Aston Martin DB2 weights approximately 35 kg more than 2000 Peugeot 206. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2000 Peugeot 206, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Aston Martin DB2 (240 Nm @ 3000 RPM) has 93 more torque (in Nm) than 2000 Peugeot 206. (147 Nm @ 4000 RPM). This means 1956 Aston Martin DB2 will have an easier job in driving up hills or pulling heavy equipment than 2000 Peugeot 206. 2000 Peugeot 206 has automatic transmission and 1956 Aston Martin DB2 has manual transmission. 1956 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Peugeot 206 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 Aston Martin DB2 | 2000 Peugeot 206 | |
| Make | Aston Martin | Peugeot |
| Model | DB2 | 206 |
| Year Released | 1956 | 2000 |
| Engine Position | Front | Front |
| Engine Size | 2920 cc | 1578 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 118 HP | 108 HP |
| Engine RPM | 5000 RPM | 6000 RPM |
| Torque | 240 Nm | 147 Nm |
| Torque RPM | 3000 RPM | 4000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 4 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1175 kg | 1140 kg |
| Vehicle Length | 4310 mm | 3840 mm |
| Vehicle Width | 1660 mm | 1680 mm |
| Vehicle Height | 1370 mm | 1380 mm |
| Wheelbase Size | 2520 mm | 2450 mm |
| Fuel Tank Capacity | 86 L | 47 L |
