1956 Aston Martin DB2 vs. 2010 GMC Acadia
To start off, 2010 GMC Acadia is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB2 would be higher. At 3,600 cc (6 cylinders), 2010 GMC Acadia is equipped with a bigger engine. In terms of performance, 2010 GMC Acadia (288 HP @ 6300 RPM) has 170 more horse power than 1956 Aston Martin DB2. (118 HP @ 5000 RPM) In normal driving conditions, 2010 GMC Acadia should accelerate faster than 1956 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2010 GMC Acadia weights approximately 967 kg more than 1956 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2010 GMC Acadia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 GMC Acadia (366 Nm @ 3400 RPM) has 126 more torque (in Nm) than 1956 Aston Martin DB2. (240 Nm @ 3000 RPM). This means 2010 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1956 Aston Martin DB2. 2010 GMC Acadia has automatic transmission and 1956 Aston Martin DB2 has manual transmission. 1956 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 GMC Acadia will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 Aston Martin DB2 | 2010 GMC Acadia | |
| Make | Aston Martin | GMC |
| Model | DB2 | Acadia |
| Year Released | 1956 | 2010 |
| Body Type | Coupe | SUV |
| Engine Position | Front | Front |
| Engine Size | 2920 cc | 3600 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 118 HP | 288 HP |
| Engine RPM | 5000 RPM | 6300 RPM |
| Torque | 240 Nm | 366 Nm |
| Torque RPM | 3000 RPM | 3400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1175 kg | 2142 kg |
| Vehicle Length | 4310 mm | 5098 mm |
| Vehicle Width | 1660 mm | 1986 mm |
| Vehicle Height | 1370 mm | 1849 mm |
| Wheelbase Size | 2520 mm | 3020 mm |
| Fuel Tank Capacity | 86 L | 83 L |
