1956 Aston Martin DB2 vs. 2013 Ford Transit Connect
To start off, 2013 Ford Transit Connect is newer by 57 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB2 would be higher. At 2,920 cc (6 cylinders), 1956 Aston Martin DB2 is equipped with a bigger engine. In terms of performance, 2013 Ford Transit Connect (134 HP @ 6300 RPM) has 16 more horse power than 1956 Aston Martin DB2. (118 HP @ 5000 RPM) In normal driving conditions, 2013 Ford Transit Connect should accelerate faster than 1956 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2013 Ford Transit Connect weights approximately 359 kg more than 1956 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2013 Ford Transit Connect, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Aston Martin DB2 (240 Nm @ 3000 RPM) has 66 more torque (in Nm) than 2013 Ford Transit Connect. (174 Nm @ 4750 RPM). This means 1956 Aston Martin DB2 will have an easier job in driving up hills or pulling heavy equipment than 2013 Ford Transit Connect. 2013 Ford Transit Connect has automatic transmission and 1956 Aston Martin DB2 has manual transmission. 1956 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Ford Transit Connect will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Aston Martin DB2 | 2013 Ford Transit Connect | |
Make | Aston Martin | Ford |
Model | DB2 | Transit Connect |
Year Released | 1956 | 2013 |
Body Type | Coupe | Minivan |
Engine Position | Front | Front |
Engine Size | 2920 cc | 2000 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 118 HP | 134 HP |
Engine RPM | 5000 RPM | 6300 RPM |
Torque | 240 Nm | 174 Nm |
Torque RPM | 3000 RPM | 4750 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 4-speed automatic |
Number of Seats | 4 seats | 2 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1175 kg | 1534 kg |
Vehicle Length | 4310 mm | 4587 mm |
Vehicle Width | 1660 mm | 2113 mm |
Vehicle Height | 1370 mm | 2014 mm |
Wheelbase Size | 2520 mm | 2911 mm |
Fuel Tank Capacity | 86 L | 58 L |