1956 Aston Martin DB3 vs. 2002 Donkervoort D8
To start off, 2002 Donkervoort D8 is newer by 46 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB3 would be higher. At 2,922 cc (6 cylinders), 1956 Aston Martin DB3 is equipped with a bigger engine. In terms of performance, 2002 Donkervoort D8 (148 HP @ 5700 RPM) has 10 more horse power than 1956 Aston Martin DB3. (138 HP @ 5500 RPM) In normal driving conditions, 2002 Donkervoort D8 should accelerate faster than 1956 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 1956 Aston Martin DB3 weights approximately 380 kg more than 2002 Donkervoort D8.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Aston Martin DB3 (243 Nm @ 5500 RPM) has 33 more torque (in Nm) than 2002 Donkervoort D8. (210 Nm @ 1750 RPM). This means 1956 Aston Martin DB3 will have an easier job in driving up hills or pulling heavy equipment than 2002 Donkervoort D8.
Compare all specifications:
1956 Aston Martin DB3 | 2002 Donkervoort D8 | |
Make | Aston Martin | Donkervoort |
Model | DB3 | D8 |
Year Released | 1956 | 2002 |
Engine Position | Front | Front |
Engine Size | 2922 cc | 1780 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 5 valves |
Horse Power | 138 HP | 148 HP |
Engine RPM | 5500 RPM | 5700 RPM |
Torque | 243 Nm | 210 Nm |
Torque RPM | 5500 RPM | 1750 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 2 seats | 2 seats |
Vehicle Weight | 1005 kg | 625 kg |
Vehicle Width | 1510 mm | 1740 mm |