1956 Aston Martin DB3 vs. 2005 McLaren F1

To start off, 2005 McLaren F1 is newer by 49 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB3 would be higher. At 6,063 cc (12 cylinders), 2005 McLaren F1 is equipped with a bigger engine. In terms of performance, 2005 McLaren F1 (618 HP @ 7400 RPM) has 480 more horse power than 1956 Aston Martin DB3. (138 HP @ 5500 RPM) In normal driving conditions, 2005 McLaren F1 should accelerate faster than 1956 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2005 McLaren F1 weights approximately 165 kg more than 1956 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 McLaren F1 (649 Nm @ 4000 RPM) has 406 more torque (in Nm) than 1956 Aston Martin DB3. (243 Nm @ 5500 RPM). This means 2005 McLaren F1 will have an easier job in driving up hills or pulling heavy equipment than 1956 Aston Martin DB3.

Compare all specifications:

1956 Aston Martin DB3 2005 McLaren F1
Make Aston Martin McLaren
Model DB3 F1
Year Released 1956 2005
Engine Position Front Middle
Engine Size 2922 cc 6063 cc
Engine Cylinders 6 cylinders 12 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 138 HP 618 HP
Engine RPM 5500 RPM 7400 RPM
Torque 243 Nm 649 Nm
Torque RPM 5500 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 2 seats 3 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1005 kg 1170 kg
Vehicle Width 1510 mm 1830 mm