1956 Aston Martin DB3 vs. 2007 Volvo C70

To start off, 2007 Volvo C70 is newer by 51 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB3 would be higher. At 2,922 cc (6 cylinders), 1956 Aston Martin DB3 is equipped with a bigger engine. In terms of performance, both vehicles can yield 138 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2007 Volvo C70 weights approximately 687 kg more than 1956 Aston Martin DB3.

Because 1956 Aston Martin DB3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB3. However, in wet, icy, snow, or gravel driving conditions, 2007 Volvo C70, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Aston Martin DB3 (243 Nm @ 5500 RPM) has 23 more torque (in Nm) than 2007 Volvo C70. (220 Nm @ 4000 RPM). This means 1956 Aston Martin DB3 will have an easier job in driving up hills or pulling heavy equipment than 2007 Volvo C70.

Compare all specifications:

1956 Aston Martin DB3 2007 Volvo C70
Make Aston Martin Volvo
Model DB3 C70
Year Released 1956 2007
Engine Position Front Front
Engine Size 2922 cc 2435 cc
Engine Cylinders 6 cylinders 5 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 138 HP 138 HP
Engine RPM 5500 RPM 5000 RPM
Torque 243 Nm 220 Nm
Torque RPM 5500 RPM 4000 RPM
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1005 kg 1692 kg
Vehicle Width 1510 mm 1830 mm