1956 Aston Martin DB3 vs. 2008 Mitsubishi Endeavor
To start off, 2008 Mitsubishi Endeavor is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB3 would be higher. At 3,828 cc (6 cylinders), 2008 Mitsubishi Endeavor is equipped with a bigger engine. In terms of performance, 2008 Mitsubishi Endeavor (225 HP @ 5000 RPM) has 15 more horse power than 1956 Aston Martin DB3. (210 HP @ 6000 RPM) In normal driving conditions, 2008 Mitsubishi Endeavor should accelerate faster than 1956 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mitsubishi Endeavor weights approximately 626 kg more than 1956 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Aston Martin DB3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB3. However, in wet, icy, snow, or gravel driving conditions, 2008 Mitsubishi Endeavor, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mitsubishi Endeavor (346 Nm @ 3750 RPM) has 151 more torque (in Nm) than 1956 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 2008 Mitsubishi Endeavor will have an easier job in driving up hills or pulling heavy equipment than 1956 Aston Martin DB3. 2008 Mitsubishi Endeavor has automatic transmission and 1956 Aston Martin DB3 has manual transmission. 1956 Aston Martin DB3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mitsubishi Endeavor will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 Aston Martin DB3 | 2008 Mitsubishi Endeavor | |
| Make | Aston Martin | Mitsubishi |
| Model | DB3 | Endeavor |
| Year Released | 1956 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2920 cc | 3828 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 210 HP | 225 HP |
| Engine RPM | 6000 RPM | 5000 RPM |
| Torque | 195 Nm | 346 Nm |
| Torque RPM | 3000 RPM | 3750 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 914 kg | 1540 kg |
| Vehicle Length | 3920 mm | 4850 mm |
| Vehicle Width | 1510 mm | 1880 mm |
| Vehicle Height | 1050 mm | 1770 mm |
| Wheelbase Size | 2220 mm | 2760 mm |
| Fuel Tank Capacity | 70 L | 81 L |
