1956 Aston Martin DB3 vs. 2008 Toyota Camry
To start off, 2008 Toyota Camry is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB3 would be higher. At 3,456 cc (6 cylinders), 2008 Toyota Camry is equipped with a bigger engine. In terms of performance, 2008 Toyota Camry (268 HP) has 58 more horse power than 1956 Aston Martin DB3. (210 HP) In normal driving conditions, 2008 Toyota Camry should accelerate faster than 1956 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2008 Toyota Camry weights approximately 416 kg more than 1956 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Aston Martin DB3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Aston Martin DB3. However, in wet, icy, snow, or gravel driving conditions, 2008 Toyota Camry, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Toyota Camry (336 Nm @ 4700 RPM) has 141 more torque (in Nm) than 1956 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 2008 Toyota Camry will have an easier job in driving up hills or pulling heavy equipment than 1956 Aston Martin DB3. 2008 Toyota Camry has automatic transmission and 1956 Aston Martin DB3 has manual transmission. 1956 Aston Martin DB3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Toyota Camry will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Aston Martin DB3 | 2008 Toyota Camry | |
Make | Aston Martin | Toyota |
Model | DB3 | Camry |
Year Released | 1956 | 2008 |
Engine Position | Front | Front |
Engine Size | 2920 cc | 3456 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 210 HP | 268 HP |
Torque | 195 Nm | 336 Nm |
Torque RPM | 3000 RPM | 4700 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 914 kg | 1330 kg |
Vehicle Length | 3920 mm | 4810 mm |
Vehicle Width | 1510 mm | 1830 mm |
Vehicle Height | 1050 mm | 1480 mm |
Wheelbase Size | 2220 mm | 2780 mm |
Fuel Tank Capacity | 70 L | 70 L |