1956 Aston Martin DB3 vs. 2012 Mercedes-Benz ML
To start off, 2012 Mercedes-Benz ML is newer by 56 year(s). Which means there will be less support and parts availability for 1956 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1956 Aston Martin DB3 would be higher. At 4,600 cc (8 cylinders), 2012 Mercedes-Benz ML is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz ML (399 HP @ 5000 RPM) has 189 more horse power than 1956 Aston Martin DB3. (210 HP @ 6000 RPM) In normal driving conditions, 2012 Mercedes-Benz ML should accelerate faster than 1956 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz ML weights approximately 1347 kg more than 1956 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Mercedes-Benz ML is all wheel drive (AWD), it will have significant more traction and grip than 1956 Aston Martin DB3. In wet, icy, snow, or gravel driving conditions, 2012 Mercedes-Benz ML will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz ML (600 Nm @ 1600 RPM) has 405 more torque (in Nm) than 1956 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 2012 Mercedes-Benz ML will have an easier job in driving up hills or pulling heavy equipment than 1956 Aston Martin DB3. 2012 Mercedes-Benz ML has automatic transmission and 1956 Aston Martin DB3 has manual transmission. 1956 Aston Martin DB3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz ML will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Aston Martin DB3 | 2012 Mercedes-Benz ML | |
Make | Aston Martin | Mercedes-Benz |
Model | DB3 | ML |
Year Released | 1956 | 2012 |
Engine Position | Front | Front |
Engine Size | 2920 cc | 4600 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 210 HP | 399 HP |
Engine RPM | 6000 RPM | 5000 RPM |
Torque | 195 Nm | 600 Nm |
Torque RPM | 3000 RPM | 1600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | AWD |
Transmission Type | Manual | 7-speed shiftable automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 914 kg | 2261 kg |
Vehicle Length | 3920 mm | 4803 mm |
Vehicle Width | 1510 mm | 2141 mm |
Vehicle Height | 1050 mm | 1796 mm |
Wheelbase Size | 2220 mm | 2916 mm |
Fuel Tank Capacity | 70 L | 93 L |