1956 Austin A 30 vs. 1978 Austin Allegro
To start off, 1978 Austin Allegro is newer by 22 year(s). Which means there will be less support and parts availability for 1956 Austin A 30. In addition, the cost of maintenance, including insurance, on 1956 Austin A 30 would be higher. At 1,275 cc (4 cylinders), 1978 Austin Allegro is equipped with a bigger engine. In terms of performance, 1978 Austin Allegro (59 HP) has 31 more horse power than 1956 Austin A 30. (28 HP) In normal driving conditions, 1978 Austin Allegro should accelerate faster than 1956 Austin A 30. With that said, vehicle weight also plays an important factor in acceleration. 1978 Austin Allegro weights approximately 170 kg more than 1956 Austin A 30. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Austin A 30 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Austin A 30. However, in wet, icy, snow, or gravel driving conditions, 1978 Austin Allegro, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1956 Austin A 30 | 1978 Austin Allegro | |
| Make | Austin | Austin |
| Model | A 30 | Allegro |
| Year Released | 1956 | 1978 |
| Engine Position | Front | Front |
| Engine Size | 802 cc | 1275 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 28 HP | 59 HP |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 680 kg | 850 kg |
| Vehicle Length | 3470 mm | 4000 mm |
| Vehicle Width | 1410 mm | 1620 mm |
| Vehicle Height | 1490 mm | 1430 mm |
| Wheelbase Size | 2030 mm | 2450 mm |
