1956 Austin A 40 vs. 2002 Cadillac Seville
To start off, 2002 Cadillac Seville is newer by 46 year(s). Which means there will be less support and parts availability for 1956 Austin A 40. In addition, the cost of maintenance, including insurance, on 1956 Austin A 40 would be higher. At 4,572 cc (8 cylinders), 2002 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2002 Cadillac Seville (300 HP @ 6000 RPM) has 251 more horse power than 1956 Austin A 40. (49 HP @ 4400 RPM) In normal driving conditions, 2002 Cadillac Seville should accelerate faster than 1956 Austin A 40. With that said, vehicle weight also plays an important factor in acceleration. 2002 Cadillac Seville weights approximately 754 kg more than 1956 Austin A 40. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Austin A 40 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Austin A 40. However, in wet, icy, snow, or gravel driving conditions, 2002 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Cadillac Seville (407 Nm @ 4500 RPM) has 307 more torque (in Nm) than 1956 Austin A 40. (100 Nm @ 2100 RPM). This means 2002 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1956 Austin A 40. 2002 Cadillac Seville has automatic transmission and 1956 Austin A 40 has manual transmission. 1956 Austin A 40 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Austin A 40 | 2002 Cadillac Seville | |
Make | Austin | Cadillac |
Model | A 40 | Seville |
Year Released | 1956 | 2002 |
Engine Position | Front | Front |
Engine Size | 1489 cc | 4572 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 49 HP | 300 HP |
Engine RPM | 4400 RPM | 6000 RPM |
Torque | 100 Nm | 407 Nm |
Torque RPM | 2100 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1050 kg | 1804 kg |
Vehicle Length | 4130 mm | 5110 mm |
Vehicle Width | 1570 mm | 1910 mm |
Vehicle Height | 1570 mm | 1420 mm |
Wheelbase Size | 2530 mm | 2890 mm |
Fuel Tank Capacity | 72 L | 70 L |