1956 Austin A 90 vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 57 year(s). Which means there will be less support and parts availability for 1956 Austin A 90. In addition, the cost of maintenance, including insurance, on 1956 Austin A 90 would be higher. At 2,639 cc (6 cylinders), 1956 Austin A 90 is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (171 HP @ 6400 RPM) has 86 more horse power than 1956 Austin A 90. (85 HP @ 4000 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1956 Austin A 90. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 494 kg more than 1956 Austin A 90. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Austin A 90 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Austin A 90. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 185 more torque (in Nm) than 1956 Austin A 90. (168 Nm @ 2000 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1956 Austin A 90. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1956 Austin A 90 has manual transmission. 1956 Austin A 90 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 Austin A 90 | 2013 Chrysler 200 CONVERTIBLE | |
| Make | Austin | Chrysler |
| Model | A 90 | 200 CONVERTIBLE |
| Year Released | 1956 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 2639 cc | 2400 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 85 HP | 171 HP |
| Engine RPM | 4000 RPM | 6400 RPM |
| Torque | 168 Nm | 353 Nm |
| Torque RPM | 2000 RPM | 4400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1320 kg | 1814 kg |
| Vehicle Length | 4350 mm | 4947 mm |
| Vehicle Width | 1630 mm | 2089 mm |
| Vehicle Height | 1620 mm | 1470 mm |
| Wheelbase Size | 2640 mm | 2765 mm |
| Fuel Tank Capacity | 72 L | 64 L |
