1956 Austin A 95 vs. 2008 Chrysler PT Cruiser
To start off, 2008 Chrysler PT Cruiser is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Austin A 95. In addition, the cost of maintenance, including insurance, on 1956 Austin A 95 would be higher. At 2,639 cc (6 cylinders), 1956 Austin A 95 is equipped with a bigger engine. In terms of performance, 2008 Chrysler PT Cruiser (150 HP @ 5100 RPM) has 58 more horse power than 1956 Austin A 95. (92 HP @ 4500 RPM) In normal driving conditions, 2008 Chrysler PT Cruiser should accelerate faster than 1956 Austin A 95. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler PT Cruiser weights approximately 523 kg more than 1956 Austin A 95. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Austin A 95 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Austin A 95. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler PT Cruiser (224 Nm @ 4000 RPM) has 48 more torque (in Nm) than 1956 Austin A 95. (176 Nm @ 2000 RPM). This means 2008 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1956 Austin A 95. 2008 Chrysler PT Cruiser has automatic transmission and 1956 Austin A 95 has manual transmission. 1956 Austin A 95 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 Austin A 95 | 2008 Chrysler PT Cruiser | |
| Make | Austin | Chrysler |
| Model | A 95 | PT Cruiser |
| Year Released | 1956 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2639 cc | 2429 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 92 HP | 150 HP |
| Engine RPM | 4500 RPM | 5100 RPM |
| Torque | 176 Nm | 224 Nm |
| Torque RPM | 2000 RPM | 4000 RPM |
| Engine Bore Size | 79.4 mm | 87.5 mm |
| Engine Stroke Size | 88.9 mm | 101 mm |
| Engine Compression Ratio | 8.3:1 | 9.5:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1350 kg | 1873 kg |
| Vehicle Length | 4600 mm | 4290 mm |
| Vehicle Width | 1630 mm | 1750 mm |
| Vehicle Height | 1580 mm | 1610 mm |
| Wheelbase Size | 2690 mm | 2620 mm |
| Fuel Tank Capacity | 72 L | 57 L |
