1956 BMW 501 vs. 1995 Chrysler Sebring

To start off, 1995 Chrysler Sebring is newer by 39 year(s). Which means there will be less support and parts availability for 1956 BMW 501. In addition, the cost of maintenance, including insurance, on 1956 BMW 501 would be higher. At 3,166 cc (8 cylinders), 1956 BMW 501 is equipped with a bigger engine. In terms of performance, both vehicles can yield 138 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1956 BMW 501 weights approximately 95 kg more than 1995 Chrysler Sebring.

Because 1956 BMW 501 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 BMW 501. However, in wet, icy, snow, or gravel driving conditions, 1995 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 BMW 501 (222 Nm) has 46 more torque (in Nm) than 1995 Chrysler Sebring. (176 Nm). This means 1956 BMW 501 will have an easier job in driving up hills or pulling heavy equipment than 1995 Chrysler Sebring.

Compare all specifications:

1956 BMW 501 1995 Chrysler Sebring
Make BMW Chrysler
Model 501 Sebring
Year Released 1956 1995
Engine Position Front Front
Engine Size 3166 cc 1996 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 138 HP 138 HP
Engine RPM 4800 RPM 6000 RPM
Torque 222 Nm 176 Nm
Engine Bore Size 82 mm 87.5 mm
Engine Stroke Size 75 mm 83 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 4 seats 4 seats
Vehicle Weight 1405 kg 1310 kg
Vehicle Length 4740 mm 4770 mm
Vehicle Width 1790 mm 1780 mm