1956 Buick 40 vs. 1968 Fiat Dino

To start off, 1968 Fiat Dino is newer by 12 year(s). Which means there will be less support and parts availability for 1956 Buick 40. In addition, the cost of maintenance, including insurance, on 1956 Buick 40 would be higher. At 5,279 cc (8 cylinders), 1956 Buick 40 is equipped with a bigger engine. In terms of performance, 1956 Buick 40 (252 HP @ 4400 RPM) has 75 more horse power than 1968 Fiat Dino. (177 HP @ 6600 RPM). In normal driving conditions, 1956 Buick 40 should accelerate faster than 1968 Fiat Dino. With that said, vehicle weight also plays an important factor in acceleration. 1956 Buick 40 weights approximately 190 kg more than 1968 Fiat Dino. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Buick 40 (462 Nm @ 3200 RPM) has 242 more torque (in Nm) than 1968 Fiat Dino. (220 Nm @ 4600 RPM). This means 1956 Buick 40 will have an easier job in driving up hills or pulling heavy equipment than 1968 Fiat Dino.

Compare all specifications:

1956 Buick 40 1968 Fiat Dino
Make Buick Fiat
Model 40 Dino
Year Released 1956 1968
Engine Position Front Front
Engine Size 5279 cc 2418 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 252 HP 177 HP
Engine RPM 4400 RPM 6600 RPM
Torque 462 Nm 220 Nm
Torque RPM 3200 RPM 4600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 5 seats 4 seats
Vehicle Weight 1590 kg 1400 kg
Vehicle Width 1950 mm 1710 mm
Wheelbase Size 3110 mm 2560 mm