1956 Cadillac 6239D vs. 1963 Lancia Fulvia
To start off, 1963 Lancia Fulvia is newer by 7 year(s). Which means there will be less support and parts availability for 1956 Cadillac 6239D. In addition, the cost of maintenance, including insurance, on 1956 Cadillac 6239D would be higher. At 5,972 cc (8 cylinders), 1956 Cadillac 6239D is equipped with a bigger engine. In terms of performance, 1956 Cadillac 6239D (285 HP @ 4600 RPM) has 195 more horse power than 1963 Lancia Fulvia. (90 HP @ 6000 RPM). In normal driving conditions, 1956 Cadillac 6239D should accelerate faster than 1963 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1956 Cadillac 6239D weights approximately 1040 kg more than 1963 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Cadillac 6239D is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Cadillac 6239D. However, in wet, icy, snow, or gravel driving conditions, 1963 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Cadillac 6239D (543 Nm @ 2800 RPM) has 427 more torque (in Nm) than 1963 Lancia Fulvia. (116 Nm @ 5000 RPM). This means 1956 Cadillac 6239D will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Fulvia. 1956 Cadillac 6239D has automatic transmission and 1963 Lancia Fulvia has manual transmission. 1963 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1956 Cadillac 6239D will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Cadillac 6239D | 1963 Lancia Fulvia | |
Make | Cadillac | Lancia |
Model | 6239D | Fulvia |
Year Released | 1956 | 1963 |
Engine Position | Front | Front |
Engine Size | 5972 cc | 1297 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 285 HP | 90 HP |
Engine RPM | 4600 RPM | 6000 RPM |
Torque | 543 Nm | 116 Nm |
Torque RPM | 2800 RPM | 5000 RPM |
Engine Bore Size | 101.6 mm | 70.8 mm |
Engine Stroke Size | 92.1 mm | 78.8 mm |
Engine Compression Ratio | 9.7:1 | 10.2:1 |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 2010 kg | 970 kg |
Vehicle Length | 5650 mm | 3990 mm |
Vehicle Width | 2040 mm | 1570 mm |
Vehicle Height | 1520 mm | 1300 mm |
Wheelbase Size | 3280 mm | 2340 mm |
Fuel Tank Capacity | 75 L | 38 L |