1956 Cadillac 6239D vs. 2010 Fiat Idea

To start off, 2010 Fiat Idea is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Cadillac 6239D. In addition, the cost of maintenance, including insurance, on 1956 Cadillac 6239D would be higher. At 5,972 cc (8 cylinders), 1956 Cadillac 6239D is equipped with a bigger engine. In terms of performance, 1956 Cadillac 6239D (285 HP @ 4600 RPM) has 185 more horse power than 2010 Fiat Idea. (100 HP @ 4000 RPM). In normal driving conditions, 1956 Cadillac 6239D should accelerate faster than 2010 Fiat Idea. With that said, vehicle weight also plays an important factor in acceleration. 1956 Cadillac 6239D weights approximately 860 kg more than 2010 Fiat Idea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Cadillac 6239D is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Cadillac 6239D. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Idea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Cadillac 6239D (543 Nm @ 2800 RPM) has 283 more torque (in Nm) than 2010 Fiat Idea. (260 Nm @ 1750 RPM). This means 1956 Cadillac 6239D will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Idea. 1956 Cadillac 6239D has automatic transmission and 2010 Fiat Idea has manual transmission. 2010 Fiat Idea will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1956 Cadillac 6239D will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Cadillac 6239D 2010 Fiat Idea
Make Cadillac Fiat
Model 6239D Idea
Year Released 1956 2010
Engine Position Front Front
Engine Size 5972 cc 1910 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 285 HP 100 HP
Engine RPM 4600 RPM 4000 RPM
Torque 543 Nm 260 Nm
Torque RPM 2800 RPM 1750 RPM
Engine Bore Size 101.6 mm 82 mm
Engine Stroke Size 92.1 mm 90.4 mm
Engine Compression Ratio 9.7:1 18.0:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 2010 kg 1150 kg
Vehicle Length 5650 mm 3940 mm
Vehicle Width 2040 mm 1700 mm
Vehicle Height 1520 mm 1670 mm
Wheelbase Size 3280 mm 2520 mm
Fuel Tank Capacity 75 L 47 L