1956 Chevrolet Bel Air vs. 2008 Chevrolet Blazer
To start off, 2008 Chevrolet Blazer is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Chevrolet Bel Air. In addition, the cost of maintenance, including insurance, on 1956 Chevrolet Bel Air would be higher. At 4,300 cc, 2008 Chevrolet Blazer is equipped with a bigger engine.
Because 2008 Chevrolet Blazer is four wheel drive (4WD), it will have significant more traction and grip than 1956 Chevrolet Bel Air. In wet, icy, snow, or gravel driving conditions, 2008 Chevrolet Blazer will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chevrolet Blazer (339 Nm @ 2800 RPM) has 61 more torque (in Nm) than 1956 Chevrolet Bel Air. (278 Nm @ 2200 RPM). This means 2008 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 1956 Chevrolet Bel Air.
Compare all specifications:
| 1956 Chevrolet Bel Air | 2008 Chevrolet Blazer | |
| Make | Chevrolet | Chevrolet |
| Model | Bel Air | Blazer |
| Year Released | 1956 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 3869 cc | 4300 cc |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 148 HP | 0 HP |
| Torque | 278 Nm | 339 Nm |
| Torque RPM | 2200 RPM | 2800 RPM |
| Engine Bore Size | 90.5 mm | 101.6 mm |
| Engine Stroke Size | 100 mm | 88.4 mm |
| Engine Compression Ratio | 8.3:1 | 9.2:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | 4WD |
| Number of Seats | 5 seats | 6 seats |
| Number of Doors | 5 doors | 4 doors |
| Vehicle Length | 4980 mm | 5100 mm |
| Vehicle Height | 1690 mm | 1500 mm |
| Wheelbase Size | 2930 mm | 2720 mm |
| Fuel Tank Capacity | 79 L | 68 L |
