1956 Chevrolet Bel Air vs. 2011 Mitsubishi Lancer

To start off, 2011 Mitsubishi Lancer is newer by 55 year(s). Which means there will be less support and parts availability for 1956 Chevrolet Bel Air. In addition, the cost of maintenance, including insurance, on 1956 Chevrolet Bel Air would be higher. At 4,343 cc (8 cylinders), 1956 Chevrolet Bel Air is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.

Because 1956 Chevrolet Bel Air is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Chevrolet Bel Air. However, in wet, icy, snow, or gravel driving conditions, 2011 Mitsubishi Lancer, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. 1956 Chevrolet Bel Air has automatic transmission and 2011 Mitsubishi Lancer has manual transmission. 2011 Mitsubishi Lancer will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1956 Chevrolet Bel Air will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Chevrolet Bel Air 2011 Mitsubishi Lancer
Make Chevrolet Mitsubishi
Model Bel Air Lancer
Year Released 1956 2011
Engine Position Front Front
Engine Size 4343 cc 2000 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 148 HP 148 HP
Engine RPM 4400 RPM 6000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Length 4980 mm 4582 mm
Vehicle Width 1890 mm 1763 mm
Vehicle Height 1690 mm 1516 mm
Wheelbase Size 2930 mm 2634 mm