1956 Daimler DK vs. 1985 Jeep CJ
To start off, 1985 Jeep CJ is newer by 29 year(s). Which means there will be less support and parts availability for 1956 Daimler DK. In addition, the cost of maintenance, including insurance, on 1956 Daimler DK would be higher. At 4,617 cc (6 cylinders), 1956 Daimler DK is equipped with a bigger engine. In terms of performance, 1956 Daimler DK (168 HP @ 3800 RPM) has 83 more horse power than 1985 Jeep CJ. (85 HP @ 5000 RPM). In normal driving conditions, 1956 Daimler DK should accelerate faster than 1985 Jeep CJ. With that said, vehicle weight also plays an important factor in acceleration. 1956 Daimler DK weights approximately 736 kg more than 1985 Jeep CJ. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1985 Jeep CJ is four wheel drive (4WD), it will have significant more traction and grip than 1956 Daimler DK. In wet, icy, snow, or gravel driving conditions, 1985 Jeep CJ will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Daimler DK (353 Nm @ 2800 RPM) has 203 more torque (in Nm) than 1985 Jeep CJ. (150 Nm @ 2750 RPM). This means 1956 Daimler DK will have an easier job in driving up hills or pulling heavy equipment than 1985 Jeep CJ.
Compare all specifications:
1956 Daimler DK | 1985 Jeep CJ | |
Make | Daimler | Jeep |
Model | DK | CJ |
Year Released | 1956 | 1985 |
Engine Position | Front | Front |
Engine Size | 4617 cc | 1995 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 168 HP | 85 HP |
Engine RPM | 3800 RPM | 5000 RPM |
Torque | 353 Nm | 150 Nm |
Torque RPM | 2800 RPM | 2750 RPM |
Drive Type | Rear | 4WD |
Vehicle Weight | 2032 kg | 1296 kg |
Vehicle Length | 5520 mm | 3900 mm |
Vehicle Width | 1960 mm | 1670 mm |
Vehicle Height | 1800 mm | 1840 mm |
Wheelbase Size | 3310 mm | 2380 mm |